Built to Spec

Grab a kit of this case from our store or grab the design files if you want to make your own or modify it!

Step 1: Remove the Masking

Be sure to remove the masking from both sides

Step 2: Insert the Delrin clips

Snap the clips in as shown above

Step 3: Insert the Delrin standoff and Mount the Arduino

Step 4: Insert Buttons

Insert the buttons with the arrow pointing up.

Step 5: Place the Arduino on the Top panel

 

Step 6: Add Side Panel

 

Step 7: Add Front Panel and Clip in place

 

Step 7: Add Back Panel and Clip in place

 

Step 8: Add the USB/Power side and final 2 clips

 

CONGRATULATIONS! You now have a fully assembled Arduino LCD Case!