{"id":2577,"date":"2015-11-20T11:18:40","date_gmt":"2015-11-20T18:18:40","guid":{"rendered":"http:\/\/www.built-to-spec.com\/blog\/?page_id=2577"},"modified":"2015-11-20T11:18:40","modified_gmt":"2015-11-20T18:18:40","slug":"small-vesa-mount","status":"publish","type":"page","link":"http:\/\/www.built-to-spec.com\/blog\/kit-instructions\/small-vesa-mount\/","title":{"rendered":"Small VESA Mount"},"content":{"rendered":"
\n

\"1\"<\/a><\/h3>\n

WARNING<\/strong><\/h3>\n

This mount is\u00a0NOT\u00a0<\/em><\/strong>a load bearing device. \u00a0It is\u00a0ONLY<\/strong><\/em> designed for use with the electronics enclosure kits sold by Built-To-Spec. \u00a0Using it in another manner may result in damaging the mount or other equipment.<\/p><\/blockquote>\n

Step 1: Prep the Parts<\/h3>\n

The laser cut acrylic parts of the kit have a protective mask that keeps the parts from getting scratched up or marred during cutting. You'll need to peel this mask off all the parts before assembly.<\/p>\n

Step 2:\u00a0Attach the case mounts<\/h3>\n

The clips for the case mount are slotted so that they fit together in a cross configuration.<\/p>\n

\"clips\"<\/a><\/p>\n

There are slots in the center of the VESA mount to receive the case mounting clips.<\/p>\n

\"insert\"<\/a><\/p>\n

Place the clips on the slots with the double prongs facing the slot on the VESA mount and press firmly until the mount clips into place.<\/p>\n

.\"insert2\"<\/a><\/p>\n

\"insert3\"<\/a><\/p>\n

 <\/p>\n

Step 3:\u00a0Mount on your monitor\/television<\/h3>\n

The mounting varies depending on your monitor\/television. \u00a0There are spacers and bolts included with the mount that should fit most VESA standard monitors\/televisions, however if the manufacturer included bolts\/screws in with your television or monitor you will need to use those instead. \u00a0The spacers may not be necessary for your specific model of television or monitor.<\/p>\n

WARNING<\/strong><\/h3>\n

This mount is\u00a0NOT\u00a0<\/em><\/strong>a load bearing device. \u00a0It is\u00a0ONLY<\/strong><\/em> designed for use with the electronics enclosure kits sold by Built-To-Spec. \u00a0Using it in another manner may result in damaging the mount or other equipment.<\/p>\n

 <\/p>\n

Step 4: Install\u00a0your case<\/h3>\n

On the bottom of compatible cases there are four holes in a cross configuration that matches the mounting clips.<\/p>\n

\"bottom\"<\/a><\/p>\n

Place the case so that the ovals on the top of the mounting clips line up with the slots on the bottom of the case.<\/p>\n

\"6\"<\/a><\/p>\n

Pressing down should secure the case in place on the clips.<\/p>\n

\"showconnect\"<\/a><\/p>\n

Step 5: (Optional) Strap your case in<\/h3>\n

The VESA mount also includes tabs that you can use for a strap (not included in kit) to strap down your electronics. \u00a0There is a strap slot on all four sides. \u00a0This allows you to strap in cases if they will be experiencing a lot of movement in your installation. \u00a0It is not required for installations that will be stationary.<\/p>\n

\"5\"<\/a><\/p>\n

 <\/p>\n

<\/h3>\n

Want one of these cases for yourself? Grab one here:
\nhttps:\/\/builttospecstore.storenvy.com\/products\/15181503-vesa-mount<\/a><\/noindex><\/p>\n

Want the design files? Grab them from my Thingiverse page:
\nhttp:\/\/www.thingiverse.com\/thing:1135284<\/a><\/noindex><\/p>\n","protected":false},"excerpt":{"rendered":"

WARNING This mount is\u00a0NOT\u00a0a load bearing device. \u00a0It is\u00a0ONLY designed for use with the electronics enclosure kits sold by Built-To-Spec. \u00a0Using it in another manner may result in damaging the mount or other equipment. Step 1: Prep the Parts The laser cut acrylic parts of the kit have a protective mask that keeps the parts […]<\/p>\n","protected":false},"author":88891,"featured_media":0,"parent":870,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2577"}],"collection":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/users\/88891"}],"replies":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/comments?post=2577"}],"version-history":[{"count":9,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2577\/revisions"}],"predecessor-version":[{"id":2601,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2577\/revisions\/2601"}],"up":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/870"}],"wp:attachment":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/media?parent=2577"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}