{"id":2551,"date":"2015-09-21T09:24:52","date_gmt":"2015-09-21T16:24:52","guid":{"rendered":"http:\/\/www.built-to-spec.com\/blog\/?page_id=2551"},"modified":"2015-09-21T09:24:52","modified_gmt":"2015-09-21T16:24:52","slug":"case-for-beagle-bone-green","status":"publish","type":"page","link":"http:\/\/www.built-to-spec.com\/blog\/kit-instructions\/case-for-beagle-bone-green\/","title":{"rendered":"Case for Beagle Bone Green"},"content":{"rendered":"

\"bbgdone\"<\/a>
\n<\/a><\/p>\n

\"parts\"<\/a><\/p>\n

<\/h3>\n

Step 1: Remove the Masking<\/h3>\n

\"bbgprepeal\"<\/a><\/p>\n

All of the acrylic components have a brown paper mask layer on them in order to protect the surface during transport and production. This layer should be removed for proper assembly of the case.<\/p>\n

\"bbgpeal\"<\/a><\/p>\n

Using your fingernail or other similar tool to start peeling the masking from a corner.<\/p>\n

\"topl\"<\/a><\/p>\n

Remove the masking from both sides.<\/p>\n

Step 2:\u00a0Insert Buttons in Top
\n<\/a><\/h3>\n

\"bbbuttons\"<\/a><\/p>\n

The button pieces have arrows which should be pointing towards the top of the case. \u00a0You will want to ensure that the buttons are placed so that the board can be laid upside down on top of this piece.<\/p>\n

 <\/p>\n

Step 3: Attach the Delrin Mounting Clips<\/h3>\n

\"bbgdelrin\"<\/a><\/p>\n

Take the two clips and clip them onto the PCB at the mounting holes as shown in the picture.<\/p>\n

 <\/p>\n

Step 4: Place the\u00a0Beagle Bone Green on the Top Panel<\/h3>\n

\"bbgstep4\"<\/a><\/p>\n

 <\/p>\n

Place the Beagle Bone Green upside down on the top panel, ensuring that the buttons on the board are in line with the button pieces on the case.<\/p>\n

 <\/p>\n

Step 5:\u00a0Place the Bottom Panel on the Beagle Bone Green<\/h3>\n

\"bbgstep5\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

Step 6: Attach the\u00a0Front and Back Panels<\/h3>\n

\"bbgstep6\"<\/a><\/p>\n

 <\/p>\n

\"bbgstep6b\"<\/a><\/p>\n

 <\/p>\n

Step 7: Attach the Side Panels<\/h3>\n

\"bbgassembled\"<\/p>\n

 <\/p>\n

Clip on the first side panel. \u00a0The side panels are keyed to match the top panel, so each side panel has a specific orientation. \u00a0Pay attention to the orientation when attempting to connect the side panels.<\/p>\n

\"bbgdone\"<\/a><\/p>\n

Clip on the second side panel. \u00a0This one may take some extra pressure to snap into place. \u00a0To make it easier, you can use a small screwdriver or similar tool to push the delrin clips down.<\/p>\n

<\/h3>\n

CONGRATULATIONS!<\/h3>\n

You have successfully assembled the case for your Beagle Bone Green Case.<\/p>\n

 <\/p>\n

\"bbgdone\"<\/a><\/p>\n

\"bbgassembled\"<\/a><\/p>\n

\"bbgassembled2\"<\/a><\/p>\n

\"bbgassembled3\"<\/a><\/p>\n

\"bbgassembled4\"<\/a><\/p>\n

\"bbgassembled5\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Want one of these cases for yourself? Grab one here:
\nhttp:\/\/builttospecstore.storenvy.com\/products\/14494635-beaglebone-green-case<\/a><\/noindex><\/p>\n

Want the design files? Grab them from my Thingiverse page:
\nhttp:\/\/www.thingiverse.com\/thing:1022901<\/a><\/noindex><\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

Step 1: Remove the Masking All of the acrylic components have a brown paper mask layer on them in order to protect the surface during transport and production. This layer should be removed for proper assembly of the case. Using your fingernail or other similar tool to start peeling the masking from a corner. Remove […]<\/p>\n","protected":false},"author":88891,"featured_media":0,"parent":870,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2551"}],"collection":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/users\/88891"}],"replies":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/comments?post=2551"}],"version-history":[{"count":3,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2551\/revisions"}],"predecessor-version":[{"id":2574,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2551\/revisions\/2574"}],"up":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/870"}],"wp:attachment":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/media?parent=2551"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}