{"id":2169,"date":"2015-03-17T14:58:11","date_gmt":"2015-03-17T21:58:11","guid":{"rendered":"http:\/\/www.built-to-spec.com\/blog\/?page_id=2169"},"modified":"2015-03-17T15:00:00","modified_gmt":"2015-03-17T22:00:00","slug":"banana-pi-case","status":"publish","type":"page","link":"http:\/\/www.built-to-spec.com\/blog\/kit-instructions\/banana-pi-case\/","title":{"rendered":"Banana Pi Case"},"content":{"rendered":"

\"IMG_4347\"<\/a><\/h3>\n

\"IMG_4295\"<\/a><\/h3>\n

Step 1: Remove the Masking<\/h3>\n

\"IMG_4297\"<\/a><\/p>\n

All of the acrylic components have a brown paper masking on them. You will need to remove it to make the parts fit together nicely. It is best to start at a corner.<\/p>\n

\"IMG_4299\"<\/a><\/p>\n

Make sure to remove the mask from both sides<\/p>\n

\"IMG_4301\"<\/a><\/p>\n

Step 2: Attach the delrin clips to the PCB<\/h3>\n

The clip with IR etched in it goes on the side with the\u00a0infrared receiver and the loop clip with IR etched on it goes next to the IR sensor.<\/p>\n

\"IMG_4306\"<\/a> \"IMG_4307\"<\/a>\"IMG_4312\"<\/a><\/p>\n

The Clip with a corner cut out goes over the SATA power connector\"IMG_4305\"<\/a>\"IMG_4314\"<\/a><\/h3>\n

Step 3: Attach the top plate<\/h3>\n

Line up the ribbon cable slots in the top panel and push it down onto the clips.<\/p>\n

\"IMG_4315\"<\/a><\/p>\n

Step 4: Set the PCB on the bottom panel<\/h3>\n

\"IMG_4318\"<\/a> \"IMG_4319\"<\/a><\/p>\n

Step 5:\u00a0Put the SD Card side in place<\/h3>\n

\"IMG_4321\"<\/a> \"IMG_4323\"<\/a><\/p>\n

Step 6:\u00a0Put the USB\/Ethernet side in place<\/h3>\n

\"IMG_4326\"<\/a> \"IMG_4327\"<\/a><\/p>\n

Step 7: Snap the Power\/HDMI\/SATA\u00a0side into place<\/h3>\n

\"IMG_4329\"<\/a> \"IMG_4331\"<\/a><\/p>\n

Step 8: Snap the Composite Video\/Audio side in place<\/h3>\n

\"IMG_4334\"<\/a> \"IMG_4336\"<\/a><\/p>\n

Step 9: Attach the button clip<\/h3>\n

\"IMG_4345\"<\/a> \"IMG_4347\"<\/a> \"IMG_4350\"<\/a><\/p>\n

Congratulations! You are done.<\/h3>\n

\"IMG_4343\"<\/a> \"IMG_4340\"<\/a> \"IMG_4339\"<\/a><\/p>\n

 <\/p>\n

Want one of these cases for yourself? Grab one here:
\nhttp:\/\/www.storenvy.com\/products\/12507294-banana-pi-case<\/a><\/noindex><\/p>\n

Want the design files? Grab them from my Thingiverse page:
\nhttp:\/\/www.thingiverse.com\/thing:727982<\/a><\/noindex><\/p>\n","protected":false},"excerpt":{"rendered":"

Step 1: Remove the Masking All of the acrylic components have a brown paper masking on them. You will need to remove it to make the parts fit together nicely. It is best to start at a corner. Make sure to remove the mask from both sides Step 2: Attach the delrin clips to the […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":870,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2169"}],"collection":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/comments?post=2169"}],"version-history":[{"count":3,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2169\/revisions"}],"predecessor-version":[{"id":2238,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/2169\/revisions\/2238"}],"up":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/870"}],"wp:attachment":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/media?parent=2169"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}