{"id":1997,"date":"2014-11-26T19:52:12","date_gmt":"2014-11-27T02:52:12","guid":{"rendered":"http:\/\/www.built-to-spec.com\/blog\/?page_id=1997"},"modified":"2016-07-01T13:13:08","modified_gmt":"2016-07-01T20:13:08","slug":"raspberry-pi-model-ab-adafruit-2-8-pitft-case","status":"publish","type":"page","link":"http:\/\/www.built-to-spec.com\/blog\/kit-instructions\/raspberry-pi-model-ab-adafruit-2-8-pitft-case\/","title":{"rendered":"Raspberry Pi Model A+\/B+ Adafruit 2.8″ PiTFT Case"},"content":{"rendered":"

\"IMG_4862\"<\/a><\/p>\n

 <\/p>\n

*Raspberry Pi 3 compatible.<\/strong><\/p>\n

Grab a kit of this case from our store<\/a><\/noindex> or grab the design files<\/a><\/noindex> if you want to make your own or modify it!<\/p>\n

This Case is designed to work with both the A+ and B+ models of the Raspberry Pi<\/p>\n

Step 1: Remove the Masking\"IMG_4757\"<\/h3>\n

All of the acrylic components have a brown paper masking on them. You will need to remove it to make the parts fit together nicely. It is best to start at a corner.<\/p>\n

\"IMG_4760\"<\/a><\/p>\n

Make sure to remove the mask from both sides<\/p>\n

\"IMG_4820\"<\/a><\/p>\n

 <\/p>\n

Step 2:\u00a0Put the USB\/Ethernet side in place<\/h3>\n

\"IMG_4825\"<\/a><\/p>\n

\"IMG_4826\"<\/a><\/h3>\n

Step 3:\u00a0Put the SD Card side in place<\/h3>\n

\"IMG_4829\"<\/a><\/p>\n

\"IMG_4831\"<\/a><\/p>\n

 <\/p>\n

Step 4: Put the Top Panel in place<\/h3>\n

\"IMG_4833\"<\/a><\/p>\n

\"IMG_4836\"<\/a><\/p>\n

 <\/p>\n

Step 5: Put the side that isn't the HDMI\/Audio side in place<\/h3>\n

\"IMG_4840\"<\/a><\/p>\n

The clip slots go closer to the SD card side and should be slightly above the midpoint.<\/p>\n

\"IMG_4842\"<\/a><\/p>\n

Step 6: Attach the delrin clips to the PCB<\/h3>\n

\"IMG_4843\"<\/a><\/p>\n

\"IMG_4845\"<\/a><\/p>\n

 <\/p>\n

Step 7: Attach the HDMI\/Audio\/Power side<\/h3>\n

\"IMG_4848\"<\/a><\/p>\n

\"IMG_4850\"<\/a><\/p>\n

Step 8: Install the PiTFT Shield to the Raspberry Pi<\/h3>\n

\"IMG_4851\"<\/a><\/p>\n

Step 9: Slide the Raspberry Pi into the Case<\/h3>\n

\"IMG_4854\"<\/a><\/p>\n

\"IMG_4856\"<\/a><\/p>\n

If you are using this case with the Raspberry Pi A+, simply change out the USB\/Ethernet sides.<\/p>\n

\"IMG_4813\"<\/a><\/p>\n

CONGRATULATIONS! You now have a fully assembled Raspberry Pi A+\/B+ PiTFT Case<\/p>\n

\"IMG_4858\"<\/a><\/p>\n

\"IMG_4860\"<\/a><\/p>\n

\"IMG_4862\"<\/a><\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

  *Raspberry Pi 3 compatible. Grab a kit of this case from our store or grab the design files if you want to make your own or modify it! This Case is designed to work with both the A+ and B+ models of the Raspberry Pi Step 1: Remove the Masking All of the acrylic […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":870,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1997"}],"collection":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/comments?post=1997"}],"version-history":[{"count":5,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1997\/revisions"}],"predecessor-version":[{"id":2643,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1997\/revisions\/2643"}],"up":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/870"}],"wp:attachment":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/media?parent=1997"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}