{"id":1971,"date":"2014-11-26T19:51:25","date_gmt":"2014-11-27T02:51:25","guid":{"rendered":"http:\/\/www.built-to-spec.com\/blog\/?page_id=1971"},"modified":"2016-07-01T13:00:51","modified_gmt":"2016-07-01T20:00:51","slug":"raspberry-pi-ab-adafruit-lcd-case","status":"publish","type":"page","link":"http:\/\/www.built-to-spec.com\/blog\/kit-instructions\/raspberry-pi-ab-adafruit-lcd-case\/","title":{"rendered":"Raspberry Pi A+\/B+ Adafruit LCD Case"},"content":{"rendered":"

\"IMG_4913\"<\/a><\/h3>\n

*Raspberry Pi 3 compatible.<\/strong><\/p>\n

Grab a kit of this case from our store<\/a><\/noindex> or grab the design files<\/a><\/noindex> if you want to make your own or modify it!<\/p>\n

This Case is designed to work with both the A+ and B+ models of the Raspberry Pi<\/p>\n

Step 1: Remove the Masking<\/h3>\n

All of the acrylic components have a brown paper masking on them. You will need to remove it to make the parts fit together nicely. It is best to start at a corner.<\/p>\n

\"IMG_4866\"<\/p>\n

Make sure to remove the mask from both sides<\/p>\n

\"IMG_4867\"<\/a><\/p>\n

 <\/p>\n

Step 2: Attach the delrin clips and LCD PCB<\/h3>\n

\"IMG_4874\"<\/a><\/p>\n

\"IMG_4876\"<\/a><\/p>\n

\"IMG_4877\"<\/a><\/p>\n

Snap the delrin clips in place\u00a0and install the LCD PCB as shown above<\/p>\n

Step 3:\u00a0Insert the Buttons into the Top Panel<\/h3>\n

\"IMG_4867\"<\/a><\/p>\n

\"IMG_4871\"<\/a><\/p>\n

\"IMG_4869\"<\/a><\/p>\n

\"IMG_4872\"<\/a><\/p>\n

Step 4: Put the USB\/Ethernet side in place<\/h3>\n

\"IMG_4880\"<\/a><\/p>\n

\"IMG_4882\"<\/a><\/p>\n

Step 5:\u00a0Put the SD Card side in place<\/h3>\n

\"IMG_4883\"<\/a><\/p>\n

\"IMG_4887\"<\/a><\/p>\n

Step 6:\u00a0Place the Pi\u00a0in Place<\/h3>\n

\"IMG_4888\"<\/a><\/p>\n

\"IMG_4892\"<\/a><\/p>\n

Step 7: Attach the Bottom Panel<\/h3>\n

\"IMG_4893\"<\/a><\/p>\n

\"IMG_4895\"<\/a><\/p>\n

 <\/p>\n

At this point you can now flip the case over<\/p>\n

\"IMG_4899\"<\/a><\/p>\n

\"IMG_4901\"<\/a><\/p>\n

\u00a0Step 8: Snap the\u00a0Power\/HDMI\/Audio side into place<\/h3>\n

\"IMG_4904\"<\/a><\/p>\n

\"IMG_4906\"<\/a><\/p>\n

Step 11:\u00a0Snap the\u00a0I\/O side in place<\/h3>\n

\"IMG_4907\"<\/a><\/p>\n

\"IMG_4911\"<\/a><\/p>\n

<\/h3>\n

CONGRATULATIONS! You now have a fully assembled Raspberry Pi A+\/B+ Adafruit LCD\u00a0Case!<\/h3>\n

If you are using this case with the Raspberry Pi A+, simply change out the USB\/Ethernet sides.<\/p>\n

\"IMG_4914\"<\/a><\/p>\n

\"IMG_4911\"<\/a><\/p>\n

\"IMG_4913\"<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

*Raspberry Pi 3 compatible. Grab a kit of this case from our store or grab the design files if you want to make your own or modify it! This Case is designed to work with both the A+ and B+ models of the Raspberry Pi Step 1: Remove the Masking All of the acrylic components […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":870,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1971"}],"collection":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/comments?post=1971"}],"version-history":[{"count":5,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1971\/revisions"}],"predecessor-version":[{"id":2637,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1971\/revisions\/2637"}],"up":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/870"}],"wp:attachment":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/media?parent=1971"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}