{"id":1910,"date":"2014-11-26T19:52:13","date_gmt":"2014-11-27T02:52:13","guid":{"rendered":"http:\/\/www.built-to-spec.com\/blog\/?page_id=1910"},"modified":"2016-07-01T13:04:17","modified_gmt":"2016-07-01T20:04:17","slug":"raspberry-pi-b-black-case","status":"publish","type":"page","link":"http:\/\/www.built-to-spec.com\/blog\/kit-instructions\/raspberry-pi-b-black-case\/","title":{"rendered":"Raspberry Pi B+ Black Case"},"content":{"rendered":"

\"IMG_5014\"<\/a><\/h3>\n

 <\/p>\n

*Raspberry Pi 3 compatible.<\/strong><\/p>\n

Grab a kit of this case from our store<\/a><\/noindex> or grab the design files<\/a><\/noindex> if you want to make your own or modify it!<\/p>\n

Step 1: Remove the Masking\"IMG_4967\"<\/h3>\n

All of the acrylic components have a brown paper masking on them. You will need to remove it to make the parts fit together nicely. It is best to start at a corner.<\/p>\n

\"IMG_4970\"<\/a><\/p>\n

Make sure to remove the mask from both sides<\/p>\n

 <\/p>\n

\"IMG_4973\"<\/a><\/p>\n

 <\/p>\n

Step 2: Attach the delrin clips<\/h3>\n

\"IMG_4974\"<\/a><\/p>\n

Take the top panel and the two delrin clips and set them out as shown in the image above.<\/p>\n

\"IMG_4977\"<\/a><\/p>\n

Snap the delrin clips in place as shown above<\/p>\n

Step 3: Mount the PCB<\/h3>\n

\"IMG_4979\"<\/a><\/p>\n

\"IMG_4980\"<\/a><\/p>\n

 <\/p>\n

Take the Raspberry Pi and mount it in place as shown in the images above.<\/p>\n

Step 4: Place the Pi on the bottom panel<\/h3>\n

\"IMG_4985\"<\/a><\/p>\n

\"IMG_4986\"<\/a><\/p>\n

Step 5: Put the SD Card side in place<\/h3>\n

\"IMG_4990\"<\/a><\/p>\n

\"IMG_4993\"<\/a><\/p>\n

Step 6: Put the USB\/Ethernet side in place<\/h3>\n

\"IMG_4995\"<\/a>\"IMG_4997\"<\/a><\/p>\n

Step 7: Attach the Top Panel<\/h3>\n

\"IMG_4999\"<\/a><\/p>\n

 <\/p>\n

\"IMG_5001\"<\/a><\/p>\n

Step 8: Snap the Power\/HDMI\/Audio side into place<\/h3>\n

 <\/p>\n

\"IMG_5002\"<\/a>\"IMG_5004\"<\/a><\/p>\n

Step 9: Snap the I\/O side in place<\/h3>\n

\"IMG_5007\"<\/a>\"IMG_5009\"<\/a><\/p>\n

CONGRATULATIONS! You now have a fully assembled Raspberry Pi B+ Black Case!<\/p>\n

\"IMG_5010\"<\/a> \"IMG_5014\"<\/a><\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

  *Raspberry Pi 3 compatible. Grab a kit of this case from our store or grab the design files if you want to make your own or modify it! Step 1: Remove the Masking All of the acrylic components have a brown paper masking on them. You will need to remove it to make the […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":870,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1910"}],"collection":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/comments?post=1910"}],"version-history":[{"count":8,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1910\/revisions"}],"predecessor-version":[{"id":2638,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1910\/revisions\/2638"}],"up":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/870"}],"wp:attachment":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/media?parent=1910"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}