{"id":1711,"date":"2014-01-23T01:24:41","date_gmt":"2014-01-23T08:24:41","guid":{"rendered":"http:\/\/www.built-to-spec.com\/blog\/?page_id=1711"},"modified":"2014-02-21T16:12:46","modified_gmt":"2014-02-21T23:12:46","slug":"pcduino-v2","status":"publish","type":"page","link":"http:\/\/www.built-to-spec.com\/blog\/pcduino-v2\/","title":{"rendered":"pcDuino v2"},"content":{"rendered":"

\"IMG_4104\"<\/a><\/p>\n

For this assembly, you will need a Phillips head screw driver.<\/p>\n

Grab the design files here:\u00a0http:\/\/www.thingiverse.com\/thing:232381<\/a><\/noindex><\/p>\n

Grab a kit here: http:\/\/www.storenvy.com\/products\/5079863-pcduino-v2-enclosure<\/a><\/noindex><\/p>\n

Step 1: Prep all of the parts<\/h3>\n

Remove the masking material from both sides of the acrylic<\/p>\n

Step 2: Insert the brass inserts<\/h3>\n

Take the plate that looks like this and the 6 brass inserts:<\/p>\n

\"IMG_4133\"<\/a><\/p>\n

and push the brass inserts into the holes from the bottom as shown in the image below:\"IMG_4134\"<\/a> \"IMG_4139\"<\/a> \"IMG_4136\"<\/a><\/p>\n

Step 3: Add the next layer.<\/h3>\n

Take the two half pieces and place them in the same orientation:<\/p>\n

\"IMG_4131\"<\/a><\/p>\n

 <\/p>\n

Step 4: Add the PCB<\/h3>\n

Take the pcDuino and place it in the same orientation:<\/p>\n

\"IMG_4128\"<\/a><\/p>\n

 <\/p>\n

Step 5: Add PCB edge pieces<\/h3>\n

Take the thin acrylic pieces and place them around the edge of the PCB in the same orientation:<\/p>\n

\"IMG_4126\"<\/a><\/p>\n

 <\/p>\n

Step 6: Add the next layer (starting to get a little repetitive, ain't it?)<\/h3>\n

It looks like this:<\/p>\n

\"IMG_4125\"<\/a>and place it in the same orientation.<\/p>\n

Step 7: Add the next piece<\/h3>\n

It looks like this:\"IMG_4123\"<\/a><\/p>\n

and\u00a0place it in the same orientation.<\/p>\n

Step 8: Add the buttons<\/h3>\n

\"IMG_4121\"<\/a>They go in the holes.<\/p>\n

Step 9: Add the next layer<\/h3>\n

It looks like this:\"IMG_4119\"<\/a><\/p>\n

and, you guessed it, place it on in the same orientation.<\/p>\n

Step 10: Add the last and final layer<\/h3>\n

\"IMG_4117\"<\/a>\"IMG_4115\"<\/p>\n

 <\/p>\n

Step 11: Put in the screws<\/h3>\n

\"IMG_4114\"<\/a>and you're DONE!<\/p>\n

\"IMG_4111\"<\/a>\"IMG_4108\"<\/a> \"IMG_4109\"\"IMG_4105\"<\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

For this assembly, you will need a Phillips head screw driver. Grab the design files here:\u00a0http:\/\/www.thingiverse.com\/thing:232381 Grab a kit here: http:\/\/www.storenvy.com\/products\/5079863-pcduino-v2-enclosure Step 1: Prep all of the parts Remove the masking material from both sides of the acrylic Step 2: Insert the brass inserts Take the plate that looks like this and the 6 brass […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"open","ping_status":"open","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1711"}],"collection":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/comments?post=1711"}],"version-history":[{"count":5,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1711\/revisions"}],"predecessor-version":[{"id":1736,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1711\/revisions\/1736"}],"wp:attachment":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/media?parent=1711"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}