{"id":1395,"date":"2013-07-13T14:08:21","date_gmt":"2013-07-13T21:08:21","guid":{"rendered":"http:\/\/www.built-to-spec.com\/blog\/?page_id=1395"},"modified":"2014-02-21T16:08:19","modified_gmt":"2014-02-21T23:08:19","slug":"apc-rock-enclosure-assembly","status":"publish","type":"page","link":"http:\/\/www.built-to-spec.com\/blog\/kit-instructions\/apc-rock-enclosure-assembly\/","title":{"rendered":"APC Rock Enclosure Assembly"},"content":{"rendered":"

\"IMG_3530\"<\/a><\/h3>\n

WARNING: THIS ENCLOSURE WILL <\/b>ROCK<\/em><\/strong> YOUR WORLD*<\/p>\n

Grab the design files for this case here: http:\/\/www.thingiverse.com\/thing:117608<\/a><\/noindex><\/p>\n

Grab a kit here: http:\/\/builttospecstore.storenvy.com\/products\/1905737-apc-rock-enclosure<\/a><\/noindex><\/p>\n

These are your parts<\/h3>\n

\"IMG_3421\"<\/h3>\n

The case clips were late for the photo shoot<\/p>\n

\"IMG_3426\"<\/a><\/h3>\n

<\/h3>\n

Step 1: Prep the parts<\/h3>\n

\"IMG_3423\"<\/h3>\n

Remove the masking from both sides of the parts.<\/p>\n

Step 2: Insert PCB mounting brackets<\/h3>\n

Take the bottom panel and set it in front of you as shown in the image below:<\/p>\n

\"IMG_3424\"<\/a><\/h3>\n

Insert the PCB clips as shown:<\/p>\n

\"IMG_3431\"<\/a><\/h3>\n

\"IMG_3428\"<\/a><\/h3>\n

<\/h3>\n

Step 3: Install the back panel<\/h3>\n

Install the back panel as shown:<\/p>\n

\"IMG_3432\"<\/a><\/h3>\n

Step 4: Install the front panel<\/h3>\n

Install the front panel as shown:<\/p>\n

\"IMG_3434\"<\/a><\/h3>\n

<\/h3>\n

Step 5: Install the right side panel<\/h3>\n

It is currently on the left side, but I promise you that it is the right side.<\/p>\n

The right side panel is the one with the two(2) square holes closer together.<\/p>\n

Install it as shown below. Make sure to line up the square holes with the pegs of the PCB mount.<\/p>\n

\"IMG_3438\"<\/a><\/h3>\n

\"IMG_3437\"<\/h3>\n

<\/h3>\n

Step 6: Install the left side<\/h3>\n

Repeat step 5 with the left side.<\/p>\n

\"IMG_3441\"<\/h3>\n

Step 7: Install the APC Rock PCB<\/h3>\n

Turn the case around so that the back panel is away from you<\/p>\n

(See! Told you it was the right side)<\/p>\n

\"IMG_3443\"<\/h3>\n

\"IMG_3444\"<\/a><\/h3>\n

Gently push down on the PCB until it snaps into place.<\/p>\n

\"IMG_3446\"<\/a><\/h3>\n

Step 8: Install the light pipe and power button<\/h3>\n

Take the button and light pipe clip (seen here):<\/p>\n

\"IMG_3448\"<\/h3>\n

Insert the button into the clip as shown below:<\/p>\n

\"IMG_3455\"<\/a><\/h3>\n

\u00a0Install the clip into the side of the case as shown:<\/span><\/p>\n

\"IMG_3458\"<\/a><\/h3>\n

Take the light pipe in the orientation shown below and snap it in place on the clip as shown below:<\/p>\n

\"IMG_3461\"<\/h3>\n

\"IMG_3463\"<\/a><\/h3>\n

\"IMG_3464\"<\/h3>\n

Step 9: Install the top panel<\/h3>\n

Take the top panel and place it as shown below, lining up the button and light pipe holes.<\/p>\n

\"IMG_3466\"<\/a><\/h3>\n

Gently pull top of the right side panel until the top panel drops down into place.<\/p>\n

\"IMG_3468\"<\/a><\/h3>\n

Once the top panel is laying flat on the case, push the right side panel back into place.<\/p>\n

Enjoy your now assembled APC Rock Case!<\/p>\n

\"IMG_3470\"<\/a><\/h3>\n

\"IMG_3473\"<\/a><\/h3>\n

*Amount of world rocking varies. Not responsible for injuries sustained from rocked world.<\/h3>\n","protected":false},"excerpt":{"rendered":"

WARNING: THIS ENCLOSURE WILL ROCK YOUR WORLD* Grab the design files for this case here: http:\/\/www.thingiverse.com\/thing:117608 Grab a kit here: http:\/\/builttospecstore.storenvy.com\/products\/1905737-apc-rock-enclosure These are your parts The case clips were late for the photo shoot Step 1: Prep the parts Remove the masking from both sides of the parts. Step 2: Insert PCB mounting brackets Take […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":870,"menu_order":0,"comment_status":"open","ping_status":"closed","template":"","meta":[],"_links":{"self":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1395"}],"collection":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/comments?post=1395"}],"version-history":[{"count":9,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1395\/revisions"}],"predecessor-version":[{"id":1751,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/1395\/revisions\/1751"}],"up":[{"embeddable":true,"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/pages\/870"}],"wp:attachment":[{"href":"http:\/\/www.built-to-spec.com\/blog\/wp-json\/wp\/v2\/media?parent=1395"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}